734 kwp Single Post Ground Project in Asia
This project uses a single post photovoltaic bracket to address the following factors:
1. Terrain and landforms: Based on the mountainous terrain, design the size and structure of the support reasonably to adapt to the undulating terrain.
2. Ecolo...
Solar Ground Mounting Support System in Europe
Application
ground
Wind Load
60m/s
Material
AL6005-T5&SUS304
Snow Load
1.6Kn/m2
Region
Japan
Warranty
10 Years
Selection considerations
Geographical climate: Choose a suitable design based on local win...
ZAM Double Post Ground Project In Europe
It is a double column ground installation system using zinc aluminum magnesium (ZAM) coated steel, suitable for large-scale solar photovoltaic power plants.
Application
ground
Wind Load
60m/s
Material
ZAM&SUS304
Snow Load
1.4Kn/m...
1.1MW Georgia Solar Ground Mounting
Double column design: Adopting a double column structure, it provides higher stability and load-bearing capacity, suitable for various terrains and large-scale installations.
Materials and surface treatment: High strength aluminum alloys (such as AL6005-...
1.14MW Europe Solar Steel Double-post Ground
Application
ground
Wind Load
60m/s
Material
Steel&SUS304
Snow Load
1.6Kn/m2
Region
Europe
Warranty
10 Years
Components of a Solar Double Post Ground Mounting System
Posts:&...
Georgia 293.44KW Roof Project
Main Features
Lightweight design: Considering the load-bearing capacity of the roof, the brackets are usually made of lightweight materials such as aluminum alloy.
No perforation installation: The fixture style design does not require dr...
2.6MW Korea Metal Rooftop Solar Project
The project has an installed capacity of 2.6 MW. The mounting system is made of aluminum alloy and is designed with adjustable kliploks and Power Stone 47 rails. The project generates approximately 4.3 million kilowatt-hours of electricity annually.
...
Japan Ground Mounting system
Double column design: Adopting a double column structure, it provides higher stability and load-bearing capacity, suitable for various terrains and large-scale installations.
Materials and surface treatment: High strength aluminum alloys (such as AL6005-T5) or...
Aluminum Ballasted Flat Roof Mounting System In Japan
An aluminum ballasted flat roof mounting system is a non penetrating solution developed for flat roofs.The structure adopts a multi-faceted windbreak design, with high stability, and windbreaks can be selected according to local wind press...
Korea 2530KW Solar Metal Roof
Customized metal solar roof mounting system
Application
Roof
Wind Load
60m/s
Material
AL6005-T5&SUS304
Snow Load
1.4Kn/m2
Region
Asia
Warranty
10 Years
Project characteristics
1. The metal roof photo...
2.4MW Solar Ground Mounting In Japan
Mountain ground photovoltaic bracket is a photovoltaic installation system designed specifically for complex terrain, aiming to adapt to slopes, undulations, and irregular terrain, ensuring stable and efficient operation of photovoltaic modules.
Des...
680KW Saudi Cement Roof Project
Roof ballast photovoltaic bracket is a photovoltaic installation system suitable for flat roofs. The bracket is fixed by counterweight blocks (ballast) without drilling holes on the roof, avoiding damage to the roof waterproof layer. This installation method is...